PROTOTYPE DESIGN
In addition WP1 provides TailorCrete project with prototype designs, which are executed in WP7 to test and evaluate technologies developed in other WPs.
Below there is a selection of prototypes currently under development.
Prototype 1
Milled EPS blocks are covered by a manually applied rubber membrane for high reusability. Prototype 1 confirmed the effectiveness of rubber membrane for demoulding.
Detail of the 3d-printed model.
3d-printed model.
Prototype exhibited in Material World Exhibition, DAC, Denmark.
Prototype 2
Testing the use of Fiber Reinforced Self Compacting Concrete (steel fibers) as the only reinforcement system.
Visualizations of the prototype.
Built prototype